Take HP Printer Support Fix Print Head issue in HP OfficeJet 6830

The print head issues in the HP OfficeJet 6830 printer usually executes due to the excessive ink leakage. When bottom of the printer, where your print head is fixed is full of ink leakage, then you may get print head issues. It can also further lead to some dribbling issue. Well, for this kind of technical issue, a well-explained solution has been penned down by the technicians of HP Printer Support team. Just follow these troubleshooting steps to eliminate the print issue on the go.

Steps to eliminate HP OfficeJet 6830 Print head issues:

Change the ink cartridge

•          In order to change the ink cartridge, first you need to open the HP OfficeJet 6830 cover.  
•          After that, simply disconnect the power cord.

Remove or get rid of tall screws

•          Try removing all the tall screws that are located inside the inner top cover of your printer.

Proper handling of the plastic location

•          Make an appropriate note of the plastic location tape’s orientation segment to simply put this at the straight back side accurately the way it came first. Be cautious that its end section should be either towards left or right side.
•          After that, remove the tape carefully.

Manage the print-head base properly

•          For this, you need to remove all the screws instantly from the print head’s base to proceed further.
•          Carefully, lift up this whole assembly with the print head and its bar and then tilt it upside down.
•          Make sure you had disconnected all the cables from the printer’s end.

Cleaning the print head properly

•          You need to clean up the bottom of the print head section by making use of a lint-free wipe method.
•          After that, simply put back everything in its original place and then reverse the entire above instructions as described.
•          Plug-in the power cable again and then turn on your printer.
•          Go to the printer’s control panel, swipe left and after that go to the Setup / Printer Maintenance.
•          Next, choose the “Clean Print head” icon.
•          At last, tap on the clean all print heads. It will start the automatic cleaning process of print head.

Hopefully, after trying all the above methods or steps, you can easily overcome print head issues in HP OfficeJet 6830 printer. However, if you need any kind of assistance then you can put a call on help-line number which is available all day long to help out in resolving HP printer related issues. Hurry up! And get rid of your entire issues that you face while using an HP printer.

View Source:-http://printertipsservice.strikingly.com/blog/take-hp-printer-support-fix-print-head-issue-in-hp-officejet-6830